Ekta Mini Soda Bottling Plant

Introducing Ekta All-in-One Soda, Soft Drink & Juice Machine

Hygienic and Affordable

Very less space required

Single Operator needed

Counter Pressure Filling Technology (Stronger and durable Soda)

Soda and Syrup Dosage from same nozzle

3000 to 3500 Bottles per day production ( 200 ml in 12 hour cycle )

*Specs*

1. Filling System – Electro pneumatic Counter Pressure filling System (CSD plant)
2. Semi automatic mini bottling plant
3. Filling temperature is around 4-8 degrees Celsius
4. Voltage needed – 230 – 440 volt (V)
5. Filling pressure is around 60 to 90 PSI
6. Weight of the filler is around 200 kgs
7. Capacity of around 600 liters / 10 hours of non stop usage which is liter / day
8. Drive type – pneumatic
9. Motor power – 3-5 horse power
10. Control system – PLC control system
11. Type – Counter pressure
12. All contact paths and framing is SS-304

*Feature*

1. Stable performance
2. High efficiency
3. Low energy consumption
4. Low noise
5. Eco friendly
6. High performance
7. Simple control

*Usage Instructions*

1. Air compressor 1 hp with 70L tank with FRP needed
2. Pressure range 50 PSI to 80 PSI setting should be done
3. Connect blue 8 mm pressure pipe to FRP
4. The cold water which should be connected from chiller to the pump should be around 5 to 7 degrees 5. C02 bottle regulator should be attached to the carbonator
5. Attach the flavour tank to the machine before adding the flavours in it and first one need to do purging with plain water and after the water gets empty then only flavours should be added
6. Put RO water in the machine which should be around 0-3 degrees and then start it

*Soda filling machine (pneumatic system)*

• Capacity 2.0 head will be 5.0 BPM respectively Machine’s includes :

1)In build chiller 2) manual capper 3) carbonator unit 4)flavors filling tank 50 liters. 5) 2 Head botle wash 5)Co2 regulator Storage chiller with R0 100 liter R0 and 100 liter Cooling