JCB 3DX Plus Backhoe Loader Machine
₹21.00 Lakh
This is a JCB 3DX Plus Backhoe Loader Machine
Engine
Maximum Torque – 400Nm @ 1200 rpm
Gross Power – 55kW (74hp) @ 2200 rpm
Displacement – 4.4 Ltr
Compliant – CEV Stage lV
Model – JCB Plus
Loader General Dimension
Hinge Pin Forward Reach – 250 MM
Loader Arm Breakout Force – 5635 kgf
Bucket Breakout Force – 5272 kgf
Loader Bucket capacity – 0 Cum
Dump Angle – 38 deg
Rollback At Ground – 45 deg
Max Reach At Full Height – 1150 MM
Reach At Ground – 1420 MM
Max Pay Load – 1800 kgf
Hinge Pin Height – 3540 MM
Load Over Height – 3320 MM
Dump Height – 2740 MM
Max. reach at full height-bucket dumped – 780
Backhoe Loader Dimension
Max Load Over Height – 4180 MM
Max. lift capacity – 1490 Kg
dipper Tear Out Force – 3257 kgf
Bucket Breakout Force – 5959 kgf
Bucket Rotation – 185 deg
Backhoe Bucket capacity – 1 Cum
Max Working Height – 5970 MM
Reach at full height to slew center – 2740 MM
Reach Ground level to rear wheel center – 6720 MM
Maxd Dig Depth – 4770 MM
Overall Dimension & Weight
Height to top of cabin – 2870 MM
Minimum Ground Clearance – 510 MM
Wheelbase – 2170 MM
Track Width Front – 1860 MM
Track Width Rear – 1730 MM
Width Over Bucket – 2350 MM
Transport Length – 5900 MM
Max Operating Weight – 7510
Hydraulic system
Pump Flow – 114 lpm
Service Capacities
Coolant – 20.5 Ltr
Fuel Tank – 128 Ltr
transmission Oil Capacity system – 17.5 Ltr
Hydraulic oil – System – 92 Ltr
Rear Axle – 20 Ltr
Engine Oil – 15 Ltr
Axle
Front – Steer axle, centrally pivoted, with oscillation angle of 16
Rear – Drive axle rigidly mounted, incorporates JCB Max-Trac torque proportioning differential, driven by short prop shaft from gear box
Steering
System Pressure – 2 320 p.s.i. (160 bar)
Steering Type – Power track steering
Brakes
Parking – Hand operated, disc brakes on rear axle input disc
Brakes service – JCB ‘Q’ brakes, hydraulically actuated, dual line, self adjusting (compensated), oil immersed, multi-disc type on the rear axle, well protected from dirt, water etc. requiring no maintenance. Operated
Tyre
standard tyre rear – 16.9 x 28 – 12 PR
Standard tyre front – 9 x 16 – 16 PR
Travel System
Reverse – 6.5/10.5
Forward – 6.5/10.5/19.8/36
The JCB 3DX Backhoe Loader is a multi-functional construction machine that combines the capabilities of a backhoe and a wheel loader. It is designed and manufactured by JCB, a British multinational corporation.
Some of the key features of the JCB 3DX Backhoe Loader include:
- Operating weight of approximately 7,000 kg to 8,500 kg
- Engine power of approximately 74 kW (100 HP) to 104 kW (140 HP)
- Maximum digging depth of approximately 6.5 m
- Dual-mode, hydrostatic transmission for smooth and efficient operation
- Ergonomic cab with a range of features for operator comfort and efficiency
The JCB 3DX Backhoe Loader is well suited for a wide range of tasks in the construction and earthmoving industries, such as digging foundations, trenches, loading and moving materials, and various other construction and demolition tasks.
The JCB 3DX is a backhoe loader machine produced by JCB, a British multinational corporation that specializes in construction equipment. The 3DX model was first introduced in 2008 and has since become a popular choice for construction projects around the world.
Some key specifications of the JCB 3DXÂ model include:
- Engine: The JCB 3DX is powered by a 4-cylinder, water-cooled diesel engine with a maximum power output of 76 horsepower (57 kW) at 2,200 rpm.
- Loader capacity: The machine has a loader bucket capacity of 1.1 cubic meters and a lift capacity of 1800 kg.
- Backhoe capacity: The backhoe has a maximum digging depth of 4.77 meters and a reach of 5.83 meters.
- Operating weight: The operating weight of the machine is approximately 8,200 kg.
It is in a excellent working condition.
No pending loans against the machine.
This is a JCB 3DX Plus Backhoe Loader Machine
Engine
Maximum Torque – 400Nm @ 1200 rpm
Gross Power – 55kW (74hp) @ 2200 rpm
Displacement – 4.4 Ltr
Compliant – CEV Stage lV
Model – JCB Plus
Loader General Dimension
Hinge Pin Forward Reach – 250 MM
Loader Arm Breakout Force – 5635 kgf
Bucket Breakout Force – 5272 kgf
Loader Bucket capacity – 0 Cum
Dump Angle – 38 deg
Rollback At Ground – 45 deg
Max Reach At Full Height – 1150 MM
Reach At Ground – 1420 MM
Max Pay Load – 1800 kgf
Hinge Pin Height – 3540 MM
Load Over Height – 3320 MM
Dump Height – 2740 MM
Max. reach at full height-bucket dumped – 780
Backhoe Loader Dimension
Max Load Over Height – 4180 MM
Max. lift capacity – 1490 Kg
dipper Tear Out Force – 3257 kgf
Bucket Breakout Force – 5959 kgf
Bucket Rotation – 185 deg
Backhoe Bucket capacity – 1 Cum
Max Working Height – 5970 MM
Reach at full height to slew center – 2740 MM
Reach Ground level to rear wheel center – 6720 MM
Maxd Dig Depth – 4770 MM
Overall Dimension & Weight
Height to top of cabin – 2870 MM
Minimum Ground Clearance – 510 MM
Wheelbase – 2170 MM
Track Width Front – 1860 MM
Track Width Rear – 1730 MM
Width Over Bucket – 2350 MM
Transport Length – 5900 MM
Max Operating Weight – 7510
Hydraulic system
Pump Flow – 114 lpm
Service Capacities
Coolant – 20.5 Ltr
Fuel Tank – 128 Ltr
transmission Oil Capacity system – 17.5 Ltr
Hydraulic oil – System – 92 Ltr
Rear Axle – 20 Ltr
Engine Oil – 15 Ltr
Axle
Front – Steer axle, centrally pivoted, with oscillation angle of 16
Rear – Drive axle rigidly mounted, incorporates JCB Max-Trac torque proportioning differential, driven by short prop shaft from gear box
Steering
System Pressure – 2 320 p.s.i. (160 bar)
Steering Type – Power track steering
Brakes
Parking – Hand operated, disc brakes on rear axle input disc
Brakes service – JCB ‘Q’ brakes, hydraulically actuated, dual line, self adjusting (compensated), oil immersed, multi-disc type on the rear axle, well protected from dirt, water etc. requiring no maintenance. Operated
Tyre
standard tyre rear – 16.9 x 28 – 12 PR
Standard tyre front – 9 x 16 – 16 PR
Travel System
Reverse – 6.5/10.5
Forward – 6.5/10.5/19.8/36
The JCB 3DX Backhoe Loader is a multi-functional construction machine that combines the capabilities of a backhoe and a wheel loader. It is designed and manufactured by JCB, a British multinational corporation.
Some of the key features of the JCB 3DX Backhoe Loader include:
- Operating weight of approximately 7,000 kg to 8,500 kg
- Engine power of approximately 74 kW (100 HP) to 104 kW (140 HP)
- Maximum digging depth of approximately 6.5 m
- Dual-mode, hydrostatic transmission for smooth and efficient operation
- Ergonomic cab with a range of features for operator comfort and efficiency
The JCB 3DX Backhoe Loader is well suited for a wide range of tasks in the construction and earthmoving industries, such as digging foundations, trenches, loading and moving materials, and various other construction and demolition tasks.
The JCB 3DX is a backhoe loader machine produced by JCB, a British multinational corporation that specializes in construction equipment. The 3DX model was first introduced in 2008 and has since become a popular choice for construction projects around the world.
Some key specifications of the JCB 3DXÂ model include:
- Engine: The JCB 3DX is powered by a 4-cylinder, water-cooled diesel engine with a maximum power output of 76 horsepower (57 kW) at 2,200 rpm.
- Loader capacity: The machine has a loader bucket capacity of 1.1 cubic meters and a lift capacity of 1800 kg.
- Backhoe capacity: The backhoe has a maximum digging depth of 4.77 meters and a reach of 5.83 meters.
- Operating weight: The operating weight of the machine is approximately 8,200 kg.
It is in a excellent working condition.
No pending loans against the machine.
