Water Well Drilling Rig Machine
₹15.00 Lakh
This is a Water Well Drilling Rig Machine
Features:
- Excellent drilling efficiency
- Optimal energy exploitation
- Easy operations
| SHE-XL MANUAL TYPE ROD CHANGER | |
| DEPTH | 500 Mtrs |
| DIAMETER | 6 1/2″ Drill to 8 1/2″ |
| PRIME MOVER | On suitable truck mounted rig with power from truck engine through transmission gear box |
| MAST | |
| TYPE | Structural type |
| CAPACITY | 18 ton to 25 tons |
| HEIGHT | 8.6 mtrs |
| ROD HANDLING CAPACITY | 6.1 mtr (20 feet) |
| JACKS | Box type hydraulic jacks 4 Nos |
| FEED CYLINDER & WIRE ROPE | 1:3 Ratio |
| DRILL ROTARY HEAD | 3:1 Gear box |
| MOTOR | OMV 315/400 |
| Rotary spindle | 0 to 160 rpm |
| DRILL ROD CHANGING | Single Rod Manual |
| FEED CYLINDER CAPACITY | 160*2350 |
| PUMP | 50+65 GPM |
| MAX.LOAD LIFTING | 12000KG |
| COMPRESSOR | CFM/PSI
1100/350 |
| MAX.PULL UP SPEED
MAX.PULL IN SPEED |
20 ft/12 sec
20 ft/8 sec |
| MAX.TORQUE | 24450 lb-in |
| WATER PUMP P-56* TYPE WORKING PRESSURE FLOW RATE |
Triplex reciprocating pump 110 Bar 106 Lpm |
| WATER PUMP P-76* TYPE WORKING PRESSURE FLOW RATE |
Triplex reciprocating pump 180 Bar 150 Lpm |
| WELDING MACHINE* | 220 Amps,250 Amps, 300 Amps |
| HAMMER DISMANTLER* | Hydraulic type |
It is in a good working condition.
No pending loans against the machine.
Recently serviced.
This is a Water Well Drilling Rig Machine
Features:
- Excellent drilling efficiency
- Optimal energy exploitation
- Easy operations
| SHE-XL MANUAL TYPE ROD CHANGER | |
| DEPTH | 500 Mtrs |
| DIAMETER | 6 1/2″ Drill to 8 1/2″ |
| PRIME MOVER | On suitable truck mounted rig with power from truck engine through transmission gear box |
| MAST | |
| TYPE | Structural type |
| CAPACITY | 18 ton to 25 tons |
| HEIGHT | 8.6 mtrs |
| ROD HANDLING CAPACITY | 6.1 mtr (20 feet) |
| JACKS | Box type hydraulic jacks 4 Nos |
| FEED CYLINDER & WIRE ROPE | 1:3 Ratio |
| DRILL ROTARY HEAD | 3:1 Gear box |
| MOTOR | OMV 315/400 |
| Rotary spindle | 0 to 160 rpm |
| DRILL ROD CHANGING | Single Rod Manual |
| FEED CYLINDER CAPACITY | 160*2350 |
| PUMP | 50+65 GPM |
| MAX.LOAD LIFTING | 12000KG |
| COMPRESSOR | CFM/PSI
1100/350 |
| MAX.PULL UP SPEED
MAX.PULL IN SPEED |
20 ft/12 sec
20 ft/8 sec |
| MAX.TORQUE | 24450 lb-in |
| WATER PUMP P-56* TYPE WORKING PRESSURE FLOW RATE |
Triplex reciprocating pump 110 Bar 106 Lpm |
| WATER PUMP P-76* TYPE WORKING PRESSURE FLOW RATE |
Triplex reciprocating pump 180 Bar 150 Lpm |
| WELDING MACHINE* | 220 Amps,250 Amps, 300 Amps |
| HAMMER DISMANTLER* | Hydraulic type |
It is in a good working condition.
No pending loans against the machine.
Recently serviced.
